CDI MERCURY SWITCH BOX 4 CYLINDER
Product Code: 114-5772
Mercury (1976-1997 (30 Jet,40,45,50,55,75,80,85,100,115 & 125HP) Force (1991-1995 (120HP).
This switch box replaces these P/N's:
332-5772, 332-5772A 1, 332-5772A 2, 332-5772A 3, 332-5772A 4, 332-5772A 5, 332-5772A 7, 9-25104, 18-5881.
DISCONNECT THE BLACK/YELLOW KILL WIRE FROM THE SWITCHBOX: Connect a DC volt meter between the kill wire and engine ground. Turn the ignition switch on and off several times. If, at any time, you see over 2V DC on the kill wire, there is a problem with the harness or ignition switch. Battery voltage over 2V on the kill circuit may severely damage most ADI type switch boxes.
1. Disconnect the negative battery cable.
2. Check and clean all battery terminals and engine grounds.
3. Remove all wires from the old switch box.
4. Unbolt and remove the old switch box, saving the original bolts and nuts.
5. Install the new switch box using the original bolts and nuts.
6. Connect the black ground wire to engine ground.
7. Connect all wires removed from the old switch box to the new switch box.
8. Reconnect battery cable.
This switch box replaces these P/N's:
332-5772, 332-5772A 1, 332-5772A 2, 332-5772A 3, 332-5772A 4, 332-5772A 5, 332-5772A 7, 9-25104, 18-5881.
DISCONNECT THE BLACK/YELLOW KILL WIRE FROM THE SWITCHBOX: Connect a DC volt meter between the kill wire and engine ground. Turn the ignition switch on and off several times. If, at any time, you see over 2V DC on the kill wire, there is a problem with the harness or ignition switch. Battery voltage over 2V on the kill circuit may severely damage most ADI type switch boxes.
1. Disconnect the negative battery cable.
2. Check and clean all battery terminals and engine grounds.
3. Remove all wires from the old switch box.
4. Unbolt and remove the old switch box, saving the original bolts and nuts.
5. Install the new switch box using the original bolts and nuts.
6. Connect the black ground wire to engine ground.
7. Connect all wires removed from the old switch box to the new switch box.
8. Reconnect battery cable.
- Quantity Available: 4